HOW TO PAINT YOUR composite door

Our simple and affective 4 step process will help you achieve the best finish to your composite door

Step 1. Preparation

To kick things off, make sure to cover glass work, door number, letterbox and door handles using masking tape, or you may wish to remove them completely prior to painting your composite door. Also shield the walls surrounding the composite door with masking tape and use a protective sheet on the floor to catch any potential drips.

Step 2. Degrease, Purify and Dry

Start by giving your composite door a thorough clean by cleaning it with a degreaser, then wipe down with a damp cloth ensuring the surface is thoroughly clean of any lingering contaminants such as dirt, dust or grease.

c46c1bc3-3812-44f9-a077-8d311ff1c6b7 (1).jpg

Step 3. Sand and Dry

Prepare your composite door by sanding it to eliminate any irregularities on the surface like old paint, or any impediments that could affect the final finish. Wipe down with a damp cloth for the final time. Always ensure that the surface is completely dry before proceeding with the painting process.

Now, you're all set to begin the exciting part of painting your composite door.

Step 4. Paint and Perfect

Application is a breeze. Brush an even coat over the entire surface of your composite door using long horizontal even strokes, starting from the top of the door and working down to the bottom.

Repeat the process until the entire surface is covered, allowing 30 minutes between each coat.

And there you have it— your DIY task is complete. Step back and admire your handywork. Your home now has an ultra-modern composite front door.